The role of sarcoplasmic protein in hydrostatic pressure-induced myofibrillar protein denaturation.

To observe the role of sarcoplasmic protein (SP) on myofibrillar protein (MP) denaturation under a hydrostatic pressure (HP), MP isolated from bovine muscle was treated with 300 MPa by increasing concentrations of SP (0, 0.8, 1.6, and 3.2 mg/ml) from bovine. SDS-PAGE patterns of soluble proteins in 0.1M NaCl (pH 7.4) indicated that a protein (about 100 kDa) from MP decreased with increasing concentrations of SP and that a 97 kDa protein from SP observed with 0.1 MPa was not observed with 300 MPa. SDS-PAGE patterns of soluble proteins in 0.6 M NaCl (pH 7.4) and Ca-ATPase activity showed that the denaturation of myosin heavy chain (MHC) was accelerated with increasing SP concentrations with the 300 MPa treatment. Thus, the addition of SP enhanced HP-induced denaturation of MHC and of a protein from MP of about 100 kDa.

Nano-sized cobalt based Fischer-Tropsch catalysts for gas-to-liquid process applications.

Nano-sized cobalt supported catalysts were prepared for Fischer-Tropsch synthesis in gas-to-liquid (GTL) process. The dependence of crystallite size and reducibility of Co3O4 on the supports were investigated with FTS activity. XRD peaks revealed nano crystallites (< 5.47 nm) of Co3O4 crystallites. TEM showed round shaped particles with size less than 5 nm. Support with higher acidity decreased crystallite size of Co3O4. XRD data of used catalysts showed Co3O4 crystallites smaller than 3.5 nm which do not reduce easily to Co(0) state. The crystallite size of Co3O4 plays a role in its reduction to Co(0). TPR results showed that the reduction temperature shifts to higher temperature due to metal-support interaction. The variation in the activity of the catalysts depends on the support which in turn affects the crystallite size, dispersion, reducibility and activity of Co species in Fischer-Tropsch Synthesis (FTS). In this study, Co/Al2O3 showed higher CO conversion than the other catalysts. However, the C5+ production was in order Co/SiO2 (78.1%) > Co/Al2O3 (70.0%) > Co/R_TiO2 (61%) > Co/A_TiO2 (57.5%).

A study on the characteristics of CO oxidation at room temperature by metallic Pt.

Various experiments and analysis were conducted in order to manufacture a catalyst that could very efficiently oxidize carbon monoxide at room temperature and also to identify the relevant factors influencing the oxidation reaction. Pt/TiO(2) catalyst can increase the oxidizing capability of CO at low temperature and room temperature by reduction. In FT-IR experiments, the catalyst that displayed excellent activity was capable of efficiently oxidizing CO to CO(2) using atmospheric oxygen. Based on the results of XPS analysis, we found that the reduced catalyst changed the platinum's oxidation value to Pt(+2) and Pt(+0). Through the O(2)-reoxidation experiments, the catalyst, which consisted of non-stoichiometric platinum oxidized species, displayed an excellent ability to accept oxygen. In this study, the Pt/TiO(2) catalyst was able to very efficiently oxidize CO at low temperature and room temperature even with a minute quantity of platinum.

An electrochemical biosensor array for rapid detection of alanine aminotransferase and aspartate aminotransferase.

An increment of alanine aminotransferase (ALT) or aspartate aminotransferase (AST) in human serum indicates an abnormal symptom of the liver. Hence, an electrochemical biosensor array that uses micro electro mechanical systems technology is required for rapid and integrated measurement of ALT/AST. Here we describe a biosensor array consisting of two glutamate sensors. It turned out that porous silicon layers formed on each working electrode were useful to increase the effective surface area. This biosensor array was constructed with platinum electrodes and a polydimethylsiloxane (PDMS) microchannel. Electrodes in sampling wells minimized a cross-interference effect and permitted multiple sampling by immobilization with glutamate oxidase using a silanization technique. The device sensitivities derived from semi-logarithmic plots were 0.145 microA/(U/l) for ALT and 0.463 microA/(U/l) for AST over a range of 1.3 U/l to 250 U/l. Hene, this ALT/AST biosensor array can be applied in diagnostic and home use.

The control of valence state: how V/TiO2 catalyst is hindering the deactivation using the mechanochemical method.

Various experiments were conducted to improve durability against SO(2) by impregnating the same amount of vanadium in TiO(2) which had the various physical properties. According to those catalysts, the degree of deactivation by SO(2) had various results, and it was found that the production of unreacted NH(3) in selective catalytic reduction reaction should be low. Based on X-ray photoelectron spectroscopy analysis, O(2) on-off test, O(2) reoxidation test and H(2)-temperature programmed reduction experiment, the redox capacity of catalyst was improved due to increasing of non-stoichiometric compounds. Such a non-stoichiometric oxide and redox capacity of catalyst can be enhanced by the ball-milling process, and the production of ammonium sulfate salt can be more easily inhibited by the superior oxidation-reduction capacity of catalyst. We found that this result is caused by producing and increasing of V(x+) (x

Electrochemical biosensor array for liver diagnosis using silanization technique on nanoporous silicon electrode.

An electrochemical biosensor array system was fabricated for the diagnosis and monitoring of liver diseases. Analysis on this array system with multiple samples was performed for point-of-care testing or home-use applications. Cholesterol, bilirubin and aminotransferases present in the serum are well-known biomarkers for liver diseases. For this study, we describe our biosensor array system consisting of cholesterol, bilirubin and glutamate sensors. To immobilize sensing enzymes on the array system, we employed a silanization technique. We observed that porous silicon layers formed on each working electrode notably increase the effective surface area. Sensing electrodes were placed in sampling wells to minimize the cross-interference effect so that multiple sampling would be possible with a low noise current. Compared with traditional analyte measurement procedures, our novel analytical device demonstrated acceptable sensitivities for the analyses of multiple samples and analytes without a marked cross-interference effect. The device sensitivities observed were 0.2656 microA/mM for cholesterol, 0.15354 mA/mM for bilirubin, 0.13698 microA/(U/l) for alanine aminotransferase (ALT) and 0.45439 microA/(U/l) for aspartate aminotransferase (AST).

Stereoselectivity of fructose-1,6-bisphosphate aldolase in Thermus caldophilus.

It was recently established that fructose-1,6-bisphosphate (FBP) aldolase (FBA) and tagatose-1,6-bisphosphate (TBP) aldolase (TBA), two class II aldolases, are highly specific for the diastereoselective synthesis of FBP and TBP from glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP), respectively. In this paper, we report on a FBA from the thermophile Thermus caldophilus GK24 (Tca) that produces both FBP and TBP from C(3) substrates. Moreover, the FBP:TBP ratio could be adjusted by manipulating the concentrations of G3P and DHAP. This is the first native FBA known to show dual diastereoselectivity among the FBAs and TBAs characterized thus far. To explain the behavior of this enzyme, the X-ray crystal structure of the Tca FBA in complex with DHAP was determined at 2.2A resolution. It appears that as a result of alteration of five G3P binding residues, the substrate binding cavity of Tca FBA has a greater volume than those in the Escherichia coli FBA-phosphoglycolohydroxamate (PGH) and TBA-PGH complexes. We suggest that this steric difference underlies the difference in the diastereoselectivities of these class II aldolases.

Purification and characterization of prodigiosin produced by integrated bioreactor from Serratia sp. KH-95.

To date, prodigiosin and its analogues which have been shown to have anticancer, cytotoxic and immunosuppressive activities have been isolated from Serratia, Pseudomonas and Streptomyces species, and chemically synthesized. In a previous study, the red pigment content in Serratia sp. KH-95 was enhanced using a casein-enriched medium. Recently, an integrated bioreactor with an internal adsorbent has been developed to increase the production yield and allow easy recovery of the pigment. Thus, this study focused on both purifying and identifying a single red pigment from several pigments attached to the adsorbent in an integrated bioreactor. The red pigment was extracted directly from the internal adsorbent using acidified methanol and phase separation. Subsequently, it was purified by silica gel chromatography and high performance liquid chromatograph (HPLC). As a result, pure prodigiosin was identified by structural studies as a pigment. Also, this downstream procedure that uses the integrated bioreactor can be applied to the direct production and purification of other prodigiosin analogues and hydrophobic alkaloid compounds from several microorganisms.

Redispersible rutile TiO2 nanocrystals in organic media by surface chemical modification with an inorganic barium hydroxide.

The present paper describes the synthesis of the redispersible rutile TiO2 nanocrystals in organic media by surface chemical modification reaction in an aqueous barium hydroxide solution. In our facile surface modification reactions, the surfaces of the TiO2 nanocrystals are coated by bimetallic TiOBa spices and saturated with BaOH terminal groups. The inherent characteristics such as morphology, size, crystallinity, and color of the nanocrystals remained almost unchanged after surface-treatment, but their dispersibility in organic media such as methanol and DMF were remarkably enhanced. It is ascribed that BaOH groups in the surface of the TiO2 nanocrystals prevented the formation of covalently bound agglomerates through Ti-O-Ti condensation reaction among the nanocrystals during the purification and water-elimination procedures.

Core/shell silica-based in-situ microencapsulation: a self-templating method.

Core/shell SiO2 and (RSiO1.5)(1-x)-(SiO2)x (R = alkyl) microcapsules were synthesized via a single-step O/W emulsion system using a self-templating method; the facile synthetic process provides an in-situ encapsulation route for a wide range of lipophilic functional compounds.

A hexokinase with broad sugar specificity from a thermophilic bacterium.

A recombinant thermophilic Thermus caldophilus GK24 hexokinase, one of the ROK-type (repressor protein, open reading frames, and sugar kinase) proteins, exists uniquely as a 120 kDa molecule with four subunits (31 kDa), in contrast to eukaryotic and bacterial sugar kinases which are monomers or dimers. The optimal temperature and pH for the enzyme reaction are 70-80 degrees C and 7.5, respectively. This enzyme shows broad specificity toward glucose, mannose, glucosamine, allose, 2-deoxyglucose, and fructose. To understand the sugar specificity at a structural level, the enzyme-ATP/Mg2+-sugar binding complex models have been constructed. It has been shown that the sugar specificity is probably dependent on the interaction energy occurred by the positional proximity of sugars bound in the active site of the enzyme, which exhibits a tolerance to modification at C2 or C3 of glucose.

Immobilization of glutaryl-7-aminocephalosporanic acid acylase on silica gel and enhancement of its stability.

Glutaryl-7-aminocephalosporanic acid (GL-7-ACA) acylase is an enzyme that converts GL-7-ACA to 7-aminocephalosporanic acid, a starting material for semisynthetic cephalosporin antibiotics. In this study, optimal conditions for the immobilization of GL-7-ACA acylase were determined by experimental observations and statistical methods. The optimal conditions were as follows: 1.1 M phosphate buffer (pH 8.3) as buffer solution, immobilization temperature of 20 degrees C, and immobilization time of 120 min. Unreacted aldehyde groups were quenched by reaction with a low-molecular-weight material such as L-lysine, glycine, and ethanolamine after immobilization in order to enhance the activity of immobilized GL-7-ACA acylase. The activities of immobilized GL-7-ACA acylase obtained by using the low-molecular-weight materials were higher than those obtained by immobilized GL-7-ACA acylase not treated with low-molecular-weight materials. In particular, the highest activity of immobilized GL-7-ACA acylase was obtained using 0.4% (v/v) ethanolamine. We also investigated the effect of sodium cyanoborohydride in order to increase the stability of the linkage between the enzyme and the support. The effect on operational stability was obvious: the activity of immobilized GL-7-ACA acylase treated with 4% (w/w) sodium cyanoborohydride remained almost 100% after 20 times of reuse.

Interplay of SOS induction, recombinant gene expression, and multimerization of plasmid vectors in Escherichia coli.

Using pBR322- and pUC-derived plasmid vectors, a homologous (Escherichia coli native esterase) and three heterologous proteins (human interleukin-2, human interleukin-6, and Zymomonas levansucrase) were synthesized in E. coli IC2015(recA::lacZ) and GY4786 (sfiA::lacZ) strains. Via time-course measurement of beta-galactosidase activity in each recombinant culture, the SOS induction was estimated in detail and the results were systematically compared. In recombinant E. coli, the SOS response did not happen either with the recombinant insert-negative plasmid backbone alone or the expression vectors containing the homologous gene. Irrespective of gene expression level and toxic activity of synthesized foreign proteins, the SOS response was induced only when the heterologous genes were expressed using a particular plasmid vector, indicating strong dependence on the recombinant gene clone and the selection of a plasmid vector system. It is suggested that in recombinant E. coli the SOS response (i.e., activation of recA expression and initial sfiA expression) may be related neither to metabolic burden nor toxic cellular event(s) by synthesized heterologous protein, but may be provoked by foreign gene-specific interaction between a foreign gene and a plasmid vector. Unlike in E. coli XL1-blue(recA(-)) strains used, all expression vectors encoding each of the three heterologous proteins were multimerized in E. coli IC2015 strains in the course of cultivation, whereas the expression vectors containing the homologous gene never formed the plasmid multimers. The extent of multimerization was also dependent on a foreign gene insert in the expression vector. As a dominant effect of the SOS induction, recombinant plasmid vectors used for heterologous protein expression appear to significantly form various multimers in the recA(+) E. coli host.